防靜電臺墊介紹：

電子半導體器件、電子計算機、電子通訊設備和集成電路等微電子工業的生產車間和上等試驗室為消防靜電危害，均需鋪設防靜電臺墊或導電地墊，當防靜電臺墊（地墊）鋪好并接地后，工作面將泄放人體靜電，使人體與臺面接觸的ESDS鑷子、工具、器具、儀表等達到基本均一的電位，使靜電敏感器件（SSD）不受摩擦起電等靜電放電現象產生的寬步面帶的干擾，從而達到靜電防護的效果。
  防靜電臺墊主要用于抗（導）靜電材料和耗散靜電材料合成橡膠等制做而成。表面層為約0.5mm厚的耗散靜電層，底層為約1.5mm厚的導電層。常用為2mm雙層復合結構，可供顏色有綠色、灰色、蘭色、黑色、黃色等。

*表面電阻率：10⁷-10Ω⁹      *底層電阻率：10³-10Ω⁵
*磨耗率：< 0.02g/cm²       *靜電散除時間：< 0.5S

常規規格：1.2M*10M*2MM/1.0M*10M*2MM*

長度、寬度、厚度、顏色均可選擇

導電地墊用上等導電材料合成橡膠等制做而成。
表面及底層電阻率：10³Ω-10⁵Ω，常用顏色為黑色。

Anti-static pad Taiwan: D
The production workshop and advanced testing of electronic semiconductor devices, electronic computer, electronic communication equipment and integrated circuit of the microelectronics industry chamber for fire hazards, shall be covered with non static pad or conductive mat, when Taiwan anti-static mats (MAT) paved and grounding, face to the human body electrostatic discharge, potential of the human contact with the surface of ESDS tweezers, tools, appliances, instruments and other basic uniform, so that the electrostatic sensitive devices (SSD) is not affected by the friction interference wide step with generate electricity, electrostatic discharge phenomenon, thus the electrostatic protection effect at.
Anti-static pad Taiwan is mainly used for anti (Guide) make electrostatic materials and dissipation electrostatic materials, synthetic rubber and. The surface layer is static dissipation layer about 0.5mm thick, the bottom conductive layer about 1.5mm thick. Commonly used for 2mm double composite structure, available colors of green, gray, blue, black, yellow and so on.
* the surface resistivity: 107-10 Ω 9 * lower resistivity: 103-10 Ω
* wear rate: < 0.02g/cm2 * electrostatic removing time: < 0.5S
General specification: 1.2M*10M*2MM/1.0M*10M*2MM am *
The length, width, thickness, color can be choice
Conductive mat is made of high quality conductive material and synthetic rubber.
Surface and bottom resistance: 103 Ω -105 Ω, commonly used color to blac

如需了解更多防靜電臺墊資料，請致電我公司服務專線：0755-32831015